Rechargeable battery removal
Procedure
1. Use your fingers to push on the door latch and open the door upward.
2. Open the battery latch to release the battery from the slot.
3. Use the battery pull tab to remove the battery from the slot.
4. Close and latch the battery pack door
.
Battery status
When the battery pack is installed and a battery is inserted, an icon and battery menu indicates the battery status.
The battery icon is displayed in the upper right corner of the screen. Double tapping the icon opens the battery menu. The battery menu
indicates whether a battery has been inserted in slot 1 or 2, the battery serial number, a remaining charge percentage, and the battery time
to full or empty.
A safety warning message automatically displays in the battery menu when an instrument is turned on with battery power only or when the
power cord is removed from an instrument operating on battery power. You must tap the safety warning acknowledgement button to close
the battery menu.
The following table and images describe the different icon states, Time to full, and Time to empty.
Installing your instrument
2 Series MSO MSO24 and MSO22 23
To Next Page
Loading...
