Tektronix MSO 2 Series - Measurement Name Panel (Measurement Configuration Menu)

To Next Page

To Previous Page

Measurement configuration menu fields, controls, and panels

Field, control, or panel Description

Measurement Statistics

(Measurement name panel)

A list of measurement statistics related to the measurement. You can add these statistics to a

measurement badge by selecting the Show Statistics in Badge control.

Show Statistics in Badge

(Measurement name panel)

Adds the listed statistical measurement readouts to the measurement badge readout.

Results Table Button that opens the Measurement Results of the measurement. The results table displays all the

statistics of the measurement. T

o add a results table to the screen, double-tap the measurement badge

and tap Results Table.

See Add Results Table configuration menu on page 120.

Configure panel Sets the source, label text, and other fields that are specific to each measurement type.

See Configure panel (Measurement configuration menu) on page 116.

Reference Levels panel Sets the reference levels and units used to take measurements, the scope of the reference level

settings (global or local), and the method used to calculate the Top and Base waveform values.

See Reference Levels panel (Measurement configuration menu) on page 116.

Gating panel Sets the measurement region (gate) used to take measurements. Select the scope of the gate setting

(global or local), and the type of gating to use.

See Gating panel (Measurement configuration menu) on page 118.

Pass/Fail Testing panel Sets the conditions for pass/fail testing for measurements and sets actions to take when a

measurement fails.

See Pass/Fail Testing panel (Measurement Settings menu) on page 119.

Measurement Name panel (Measurement configuration menu)

The Measurement Name panel (the name of the measurement) provides controls for adding display statistics to the measurement badge

and opening

Results Table of the measurement.

To open the measurement name panel, double-tap a Measurement badge. This is the default panel shown when you open a Measurement

settings menu.

The content of the Measurement Name panel depends on the measurement.

Field or control Description

Measurement Statistics A list of measurement statistics. You can add these statistics to a measurement badge by selecting the

Show Statistics in Badge control.

Show Statistics in Badge Select to add the listed statistical measurement readouts to the measurement badge.

Results Table Adds the Measurement Results of the measurement to the screen. The results table displays all the

statistics of the measurement.

Related product manuals