Field or control Description
Act on Event Tap the Act on Event button to configure the actions the instrument must take when a Mask event
occurs
(Pass, Fail, or Hits). See Act On Event configuration menu on page 105 for the available fields
and controls.
Mask Test badge right click menu
See Right click menu functions associated with the Mask T
est badge on page 175.
Right click menu functions associated with the Mask Test badge
The following functions are available when you right click on a mask test badge.
Field or control Description
Configure Mask Test Opens the Mask Test badge configuration menu for the selected badge.
Delete Mask Test Deletes the selected mask test badge.
Math configuration menu overview
Math waveforms are created by combining and/or mathematically transforming source waveforms into a new waveform for analysis. Use
this menu to create math waveforms (basic or advanced) or add an FFT (Fast Fourier T
ransform) waveform to the screen.
To access a Math configuration menu, double-tap a Math waveform badge on the Settings bar. If no Math badge is present, tap the Math
Ref Bus > Add New Math button to add a Math waveform and open the configuration menu.
Use the following links to access information on the Math waveform menus and settings.
Math configuration menu on page 175
Equation Editor (Math configuration menu) on page 177
Math configuration menu
Use this menu to set math waveform parameters, create basic and advanced math waveforms, or add an FFT (Fast Fourier
Transformation) plot to analyze frequency components of a waveform.
To access the Math menu, double-tap a Math waveform badge. If no Math badge is present, tap the Math Ref Bus > Add New Math
button to add a math waveform and open the menu.
Math configuration menu fields and controls
Field or control Description
Display Turns the math waveform or FFT plot On or Off.
Vertical Scale Sets the vertical graticule scale units. Tap the arrows to change the value, tap and use the assigned
multipurpose knob to change values, or double-tap to open the virtual keypad to enter a specific value.
A
vailable when Auto Scale is disabled (unchecked) and Math Type is Basic or Advanced.
Table continued…
Menus and dialog boxes
2 Series MSO MSO24 and MSO22 175
To Next Page
Loading...
