5. T
o further configure cursors, double-tap on either cursor line or the cursor readouts to open the Cursors configuration menu. For
example, tap the Cursor type to select the cursors to display, such as Waveform, V Bars, H Bars, and V&H Bars.
The cursor configuration menu in the waveform view.
The cursor configuration menu in an XY plot.
6. T
o split the cursors between two waveforms, tap the Source field and select Split and select the source for each cursor. The cursors
are moved to the specified waveforms.
Analog channel operating basics
2 Series MSO MSO24 and MSO22 75
To Next Page
Loading...
