Field or control Description
Gating Sets the method to save a specified part of the waveform data.
None saves the full waveform data (default).
Cursors saves the waveform data located between the vertical cursors. If cursors aren't on when
selecting cursor gating, the cursors are activated.
Screen saves the waveform data that is on the screen.
Resample saves the waveform data at a sample interval set by the user
. The resulting saved
waveform is a resampled version of the original waveform with fewer data points.
Gating notes:
• Default Setup restores Gated Save to its default setting (None).
• The state of Gated Save gets saved in Setup and Session files.
• Gated saves do not work on plot waveform data.
• Gating cannot be used to save waveform data while in Fast Frame mode.
Setup tab fields and controls
The following settings are specific for saving an instrument setup.
Field or control Description
File save type Tap the Setup tab to save the instrument setup and measurement settings to a file. Selecting Setup
sets the file extension in the Save As T
ype field to .set.
Include Reference Waveforms Include the instrument waveforms.
Report tab fields and controls
The following settings are specific for saving an instrument report.
A report can include information on instrument settings, measurement results, screen images, individual measurement configuration,
source input settings, and error and warning information for measurements. Reports are either a PDF file or a single file W
eb page.
Field or control Description
File save type Tap the Report tab to save a report file. Selecting Report sets the file extensions in the Save as T
ype
field to available report file formats.
Save As Type Lists the available formats to which you can save files. The available save formats are set by the type
of file being saved.
Tap the field and select the report save format (PDF or Single File Web Pages).
Append Report Appends a report to an existing report file.
Comments Add comments to clarify the contents or purpose of the report, or specifics of the signals being
measured.
Include Images and
Annotations
Add Waveform and Plot images to the report.
Include Setup Configuration Add instrument and measurement configuration information to the report.
Session tab fields and controls
The following settings are specific for saving an instrument session.
Menus and dialog boxes
2 Series MSO MSO24 and MSO22 183
To Next Page
Loading...
