Field or control Description
Auto Increment File Name Select to enable auto-incrementing of the file name. Auto increment adds a number count to the end of
the file name, and increments it on each subsequent saving of the same file name.
Count Sets the increment count start number. Default is 000.
Save As Type Lists the available formats to which you can save files. The available save formats are set by the type
of file being saved.
T
ap the field and select the save format.
Cancel Cancels the file save action and closes the configuration menu.
OK Saves the file to the specified location, closes the Save As configuration menu, and displays a
confirmation message.
Screen Capture tab fields and controls
The following settings are specific for saving a screen capture
Field or control Description
File save type Tap the Screen Capture tab to save a screen image to a file. Selecting Screen Capture sets the file
extensions in the Save As T
ype field to available graphic file formats.
Save As Type Lists the available formats to which you can save files. The available save formats are set by the type
of file being saved.
Tap the field and select the graphic save format.
To save screen captures with waveforms on a white background, tap Utility>User Preferences and set Screen Capture Colors to
Inverted. When you save the next screen capture, the display inverts colors for just a moment, saves the displayed image to the file, and
returns the screen to normal colors. This capability us useful to save ink on printouts of screen captures. See the Display panel settings in
User Preferences (Utility menu) on page 188
.
Waveform tab fields and controls
The following settings are specific for saving a waveform.
Field or control Description
File save type Tap the W
aveform tab to save waveform(s) to a file. Selecting Waveform sets the file extensions in
the Save As Type field to available waveform file formats.
Save As Type Lists the available formats to which you can save files. The available save formats are set by the type
of file being saved.
Tap the field and select the graphic save format.
Source Sets the waveform source to save. You can save a single waveform, or save all active (displayed)
waveforms.
Waveform file names include the source channel or waveform appended to the end of the file name.
Display as next available Ref
waveform
Sets the waveform to be saved and automatically opened (displayed) as the next available reference
waveform. It doesn't matter what type of file is saved, that waveform will be opened as a Ref
waveform. If gating is in use, a smaller, gated waveform is saved and displayed.
This control is not present when source is set to All.
Table continued…
Menus and dialog boxes
182
To Next Page
Loading...
