Field or control Description
Measurement Interpolation Interpolation defines how the waveform is drawn between waveform record data points. Tap and select
the measurement interpolation method.
Auto selects the best interpolation method.
Sin(x)/x interpolation computes record points using a curve fit between the actual samples acquired.
Linear interpolation computes record points between actual acquired samples by using a straight line
fit.
Measurement Annotations Annotations show the exact segments of the waveform from where the chosen measurements
are taken. It is a visual aid to debug the signals. There are various markers which denote the
measurement annotations such as horizontal bars, vertical bars, triangles (or carets), or arrows.
Auto sets annotations to display if valid for the measurement. T
o view annotations for a measurement,
select that measurement badge. If annotations are valid for that measurement, they are added to the
waveform source for that measurement.
Off turns off display of measurement annotations.
The measurement annotations feature is supported on 4B/5/5B/6/6B Series MSO but not supported on
4 Series MSO.
Other panel fields and controls
Field or control Description
Language Enables displaying the user interface and Embedded Help files in an available language. Tap the field
and select the language. The user interface changes immediately to the specified language.
Note: Not all UI terms or Help topics may be translated for new UI or menu items at the time
of a firmware release. These items will be translated for a future firmware release.
Note: The Embedded Help files support English, Japanese, Simplified Chinese, and Russian.
All other language selections will display the Help topics in English.
Note: The information/warning pop-up messages display as per the selected language.
Font Size Sets the font size for UI text elements. Font size range is 12 to 19.
Right Clicks via Touch Turns On or Off the ability to use touch and hold method to open right-click menus on badges and
other screen items.
Time Sets the time it takes to respond to a touch and hold before opening a right-click menu.
Programmatic Interface
Backward Compatibility
Allows you to choose an XML file that ensures backward compatibility of the commands defined in the
XML file.
T
oggle button turns On or Off the backward compatibility option. Default is Off.
Load Tap to select the XML file. You can navigate to TekDrive to load XML file.
Appears when Programmatic Interface Backward Compatibility is On.
Connected Scope Preferences Enables the connected oscilloscope with additional capabilities and improves the overall experience
while using the oscilloscope.
Note: The oscilloscope should be connected to the Internet.
Table continued…
Menus and dialog boxes
190
To Next Page
Loading...
