2. T
ap Bus Type and select the bus type from the drop-down list.
3. Use the fields and controls to select the bus signal sources, thresholds, other parameters, and the output format. The following image
shows the settings for an
I2C serial bus.
The decoded bus is updated on the screen as you make changes to the settings.
4. Tap outside of the Bus configuration menu to close it.
5. Double-tap the Trigger badge and use the Trigger configuration menu to trigger on a specific condition in the bus.
Analog channel operating basics
2 Series MSO MSO24 and MSO22 69
To Next Page
Loading...
