Terason t3000 - Displaying the Image in Full Screen; Hiding Windows

Chapter 4 - Acquiring Images Adjusting the Displayed Image
Terason t3000 / Echo Ultrasound System User Guide 75
When you place the Windows pointer exactly between the two windows, the pointer
changes to . You can then click the left mouse button and move that border in either
direction to change the relative sizes of the two windows. When you resize a window, the
Image Display window expands or contracts to fill the space available.
Displaying the Image in Full Screen
You can set the Image Display window to encompass the entire display area of your
monitor, including the area usually reserved for the menu and Windows task bar. You can
use any of these methods:
• Press the F11 key
• Select
View > Full Screen
To return the Image Display window to its original size, press the F11 key. Alternatively,
slide the Windows pointer to the extreme top of the window. The menus display and you
can select
View > Full Screen to revert the Image Display window to its original size.
Hiding Windows
When you show all of the Terason windows, you have access to all of the software’s
functions. You can locate a patient’s information, choose an image mode, save or print
images, and all of the other Terason functions.
However, the windows take up room. To have more room for the actual scanned image,
you can hide any of the windows. You do not lose access to those functions; you can use
the menus to select them.
For example, if you hide the Terason Explorer window, you can use
Open on the File
menu to open a saved image.
When you hide windows, the Image Display window expands to fill the additional area.
To hide or show the Status bar, select
View > Status Bar.
• Right-click in the Image Control window or on a toolbar and select the toolbar
You can hide windows using any of these methods:
• Click the at the top right corner of the window
•From the View menu, select
Explorer Window, Image Control Bar, or Thumbnail Window
• Right-click in the Image Control window or on a toolbar and select Terason Explorer or
Image Control