Terason t3000 - Selecting Measurements

Chapter 7 - Working With Measurements Selecting Measurements
Terason t3000 / Echo Ultrasound System User Guide 200
If you want to review the formulas used to make the calculations for this report, refer to
Appendix G - Formulas used to Calculate Values for the Cardiac Report.
Selecting Measurements
If you have multiple measurements in the 2D or Time Series window, the Terason
software provides tools to help you select a specific measurement. Selecting a
measurement highlights both the measurement and the value.
To select a measurement, you can:
• Click or until the desired measurement is highlighted
• Click the measurement
• Click the value
HR: xx bpm xx bpm
Diameter: x.xx cm x.xx cm
CSA: x.xx cm
2
x.xx cm
2
Stroke Volume: x.x ml x.x ml
Cardiac Output: x.xx l/min x.xx l/min
Cardiac Index: x.xx l/min/m
2
x.xx l/min/m
2
Qp / Qs: x.xx
Qp - Qs: x.xx l/min
VSD Qp VSD Qs
TVI: x.xx m x.xx m
HR: xx bpm xx bpm
Diameter: x.xx cm x.xx cm
CSA: x.xx cm
2
x.xx cm
2
Stroke Volume: x.x ml x.x ml
Cardiac Output: x.xx l/min x.xx l/min
Cardiac Index: x.xx l/min/m
2
x.xx l/min/m
2
Qp / Qs: x.xx
Qp - Qs: x.xx l/min
Gen Qp Gen Qs
TVI: x.xx m x.xx m
HR: xx bpm xx bpm
Diameter: x.xx cm x.xx cm
CSA: x.xx cm
2
x.xx cm
2
Stroke Volume: x.x ml x.x ml
Cardiac Output: x.xx l/min x.xx l/min
Cardiac Index: x.xx l/min/m
2
x.xx l/min/m
2
Qp / Qs: x.xx
Qp - Qs: x.xx l/min
Qp / Qs: x.xx
Example Echocardiography Report (Continued)