Terason t3000 - Closing a Stress Echo Study

Chapter 7 - Working With Measurements Stress Echo
Terason t3000 / Echo Ultrasound System User Guide 207
b. Select the loop for a particular view by clicking the checkbox in that loop’s
pane of the Review window.
c. Click
2D to return to the scanning window.
The software advances the Acquire view indicator to the next view, and places a
checkmark in the completed view’s square in the indicator. Live thumbnail images
of selected loops display in the column at the left of the scanning window.
d. Reposition the transducer to scan another view.
e. Repeat steps aa through d until all the Impost loops are selected.
15. To change the selected loops:
a. Use the Stage Selector and View Selector buttons on the Stress Echo Scanning
window (see Stress Echo Scanning Window on page 209) to select the view you
want to choose a different loop for.
b. Click
Acquire.
c. Click the checkbox in the pane of the Review window that includes the desired
loop.
Selected images display in the Review window.
Closing a Stress Echo Study
To close a stress echo study, open the Review window and click the Close Study button
on the toolbar. (See Stress Echo Review Window on page 210.)