Tescom TC-3000C - Page 133

5.3 Reference Guide using RS-232C commands
133
READ:RFTC:EFSMA:PACK_NUM?
Description
This command reads number of packets for EDR Carrier Frequency Stability & Modulation
Accuracy(TRM/CA/11/C) measurement.
CONF:RFTC:EFSMA:PACK_NUM <Value>
Description
This command sets number of packet for EDR Carrier Frequency Stability & Modulation
Accuracy(TRM/CA/11/C) measurement
Value
Number of packets : 0~65535, 10(default)
READ:RFTC:EFSMA:TEST_MODE?
Description
This command reads testmode for EDR Carrier Frequency Stablility & Modulation Accuracy(TRM/CA/11/C)
measurement.
CONF:RFTC:EFSMA:TEST_MODE <Value>
Description
This command sets test mode for EDR Carrier Frequency Stability & Modulation Accuracy(TRM/CA/11/C)
measurement.
Value
Test Mode : TRANSMITTER_TEST(default), LOOPBACK_TEST
READ:RFTC:EFSMA:HOP?
Description
This command reads hopping mode for EDR Carrier Frequency Stability & Modulation
Accuracy(TRM/CA/11/C) measurement.
CONF:RFTC:EFSMA:HOP <value>
Description
This command sets hopping mode for EDR Carrier Frequency Stability & Modulation
Accuracy(TRM/CA/11/C) measurement
Value
Hopping Mode : OFF(default), ON
READ:RFTC:EFSMA:WI_MAX?
Description
This command reads maximum value of initial frequency error(Wi) from EDR Carrier Frequency Stability &
Modulation Accuracy(TRM/CA/11/C) measurement. Before reading this value by
"EAD:RFTC:EFSMA:WI_MAX?" command, "EXEC:RFTC:EFSMA:RUN" command should be exected to
update measurement value.
READ:RFTC:EFSMA:W0_MAX?
Description
This command reads Maximum value of Block Frequency Error(Wo) from EDR Carrier Frequency Stability &
Modulation Accuracy(TRM/CA/11/C) measurement. Before reading this value by
“READ:RFTC:EFSMA:W0_MAX?” command, “EXEC:RFTC:EFSMA:RUN” command be exected to update
measurement value.
READ:RFTC:EFSMA:W0I_MAX?
Description
This command reads maximum value of Initial Frequency Error and sum of Block Frequency Error(Wi+W0)
from EDR Carrier Frequency Stability & Modulation Accuracy(TRM/CA/11/C) measurement.