Tescom TC-3000C - Page 134

5.3 Reference Guide using RS-232C commands
134
Before reading this value by “READ:RFTC:EFSMA:W01_MAX?” command, “EXEC:RFTC:EFSMA:RUN”
command be exected to update measurement value.
READ:RFTC:EFSMA:RMS_DEVM_MAX?
Description
This command reads Maximum value of RMS DEVM freom EDR Carrier Frequency Stability & Modulation
Accuracy(TRM/CA/11/C) measurement. Before reading this value by
“READ:RFTC:EFSMA:RMS_DEVM_MAX?” command, “EXEC:RFTC:EFSMA:RUN” command be exected to
update measurement value.
READ:RFTC:EFSMA:PEAK_DEVM_MAX?
Description
This command reads maximum value of PEAK DEVM from EDR Carrier Frequency Stability & Modulation
Accuracy(TRM/CA/11/C) measurement. Before reading this value by
“READ:RFTC:EFSMA:PEAK_DEVM_MAX?” command, “EXEC:RFTC:EFSMA:RUN” command be exected
to update measurement value.
READ:RFTC:EFSMA:DEVM_RATE?
Description
This command reads DEVM Rate value from EDR Carrier Frequency Stability & Modulation
Accuracy(TRM/CA/11/C) measurement. Before reading this value by “READ:RFTC:EFSMA:DEVM_RATE?”
command, “EXEC:RFTC:EFSMA:RUN “ command be exected to update measurement value.
READ:RFTC:EFSMA:WI_MIN?
Description
This command reads minimum value of Initial Frequency Error(Wi) from EDR Carrier Frequency Stability &
Modulation Accuracy(TRM/CA/11/C) command. Before reading this value by
“READ:RFTC:EFSMA:WI_MIN?” command, “EXEC:RFTC:EFSMA:RUN” command be exected to update
measurement value.
READ:RFTC:EFSMA:W0_MIN?
Description
This command reads minimum value of Block Frequency Error(W0) from EDR Carrier Frequency Stability &
Modulation Accuracy(TRM/CA/11/C) measurement. Before reading this value by
“READ:RFTC:EFSMA:W0_MIN?” command, “EXEC:RFTC:EFSMA:RUN” command be exected to update
measurement value.
READ:RFTC:EFSMA:W0I_MIN?
Description
This command reads minimum value of sum(Wi+W0) of Block Frequency Error and Initial Frequency Error
from EDR Carrier Frequency Stability & Modulation Accuracy (TRM/CA/11/C) measurement. Before reading
this value by “READ:RFTC:EFSMA:W01_MIN?” command, “EXEC:RFTC:EFSMA:RUN” command be
exected to update measurement value.
READ:RFTC:EFSMA:WI_AV?
Description
This command reads average value of Initial Frequency Error and sum of Block Frequency Error(Wi+W0)
from EDR Carrier Frequency Stability & Modulation Accuracy(TRM/CA/11/C) measurement. Before reading
this value by “READ:RFTC:EFSMA:WI_AV?” command, “EXEC:RFTC:EFSMA:RUN” command be exected
to update measurement value.
READ:RFTC:EFSMA:WO_AV?
Description
This command reads average value of Block Frequency Error(W0) from EDR Carrier Frequency Stability &
Modulation Accuracy(TRM/CA/11/C) measurement. Before reading this value by
“READ:RFTC:EFSMA:W0_AV?” command, “EXEC:RFTC:EFSMA:RUN” command be exected to update
measurement value.