3.4 Operation Procedure (Host Analyzer)
46
[ Profile Parameters ]
Defines the timeout of L2CAP commands execution
Defines the timeout of RFCOMM commands
execution
Defines the timeout of SDP commands execution
Defines the timeout of Profile commands execution
Headset
Handsfree
AudioGateway
Defines the profile type of DUT. If you select
“None”, only the lower layers of protocol are used to
make a connection with DUT in the same way as
Link Analyzer.
If the DUT support the microphone and speaker
gain controls, checking this option enable TC-
3000C to control the volume of it.
Checking this menu causes “Speaker Volume” and
“Mic Volume” menu to be showed below.
Specifies the volume of DUT speaker in
consideration of the gain.
Specifies the volume of DUT microphone in
consideration of the gain.