THOMSON Amethyst III User Manual

Chapter 1 ’Overview’ — Chassis Description
30 Amethyst III DTV Smart Switch
User Manual
F5: General Settings
Figure 1-19. F5 and its corresponding screen
The F5 screen contains:
 Identity settings
- Equipment name “name”
 Interfaces
- Interfaces type ASI/SMPTE 310M
Available only on a single switch platform in ATSC mode. Modifying
the interface type implies a reboot of the equipment.
 SNMP settings
- Read community “community name”
- Read/Write community “community name”
- New trap IP address 0.0.0.0
- Access list mode Inactive/Active
 Date and time settings
- UTC date and time mm/dd/yy hh:mm:ss
- Local time offset hh:mm
- Use daylight savings No/Yes
- DST start date & time mm/dd/yy hh:mm:ss
- DST end date & time mm/dd/yy hh:mm:ss
- DST offset hh:mm
 Clock settings
- Source None/NTP/TDT/TOT/STT
- NTP server IP address 0.0.0.0
- Input ASI 1…ASI 8
 Configuration management
- Current configuration "configuration name"
 Access rights management
- Protect access No/Yes
- Password "password"
- Modify configuration Protected/Allowed

THOMSON Amethyst III Specifications

General

Brand	THOMSON
Model	Amethyst III
Category	Switch
Language	English