Topcon TRK-1P User Manual

37
PREPARATIONS
MAIN MENU SUB MENU MENU ITEMS SETTING ITEMS Page
(INITIAL
SETTING)
(SETTING
PRINTOUT)
KRT AVE PRINT Printing the average value of cornea
shape measurements
54
KRT DATA ORDER Changing the PRINTING SEQUENCE
cornea shape measurement values
55
KRT CYL PRINT Printing corneal astigmatism and AXIS 55
PRINT R/L Changing the PRINTING SEQUENCE 56
BAR CODE PRINT Printing the barcode 56
NAME PRINT Printing names 57
DATE PRINT Printing the date 57
DATE PRINT FORM Changing the printout format of date dis-
play
58
SERIAL No. PRINT Printing the patient No. 58
INSTRUMENT No. PRINT Printing the instrument No. 59
TOPCON PRINT Printing the TOPCON mark 59
PRINT DATA Setting for printing the measurement
result
60
ON-LINE
SETTING
OUTPUT DATA TYPE Selecting the output data format 62
DATA FORM Setting the communication format 63
DATA OUTPUT PORT Selecting the output port 65
BAUD-RATE Setting the speed of RS-232C communi-
cation
65
CL INPUT Computer the lensmeter data receiving
format
66
MENU
SETTING
R/K CONT.MEAS. Setting cont. Meas. (continuous mea-
surement)
69
DATE/TIME Setting the date and time 70
STEP Setting step 71
AXIS STEP Setting axis step 72
VD Setting VD 73
ADD Setting the addition number 74
D/mm Setting D/mm 75
HV/R1R2 Setting HV/R1R2 76
CYL SIGN Setting CYLINDER sign 77
INITIAL MODE Setting the measurement mode under
REF/KRT mode
78
MESSAGE INPUT Setting message input 79
T/P DATE/TIME Setting the date and time 81
AVERAGE MODE Setting the average value of ocular pres-
sure measurements
82
INITIAL MODE Setting the measurement mode under
TONO/PACHO mode
83
MESSAGE INPUT Setting message input 84

Topcon TRK-1P Specifications

General

Brand	Topcon
Model	TRK-1P
Category	Medical Equipment
Language	English