3 SETTING OF BASIC COPY MODES
120 Selecting Finishing Modes
1
Place paper in the drawer(s).
2
Select the paper size.
y Available copy paper sizes are LD, LT-R and LG.
y For bypass copying, see P.81 “Bypass Copying”.
To use the saddle stitch mode for LD or LG-size paper, lift the stopper of the saddle stitch
tray.
3
Place the original(s).
y When placing originals on the Reversing Automatic Document Feeder, see the illus-
trations ( P.119) for the proper page order of the copies.
y When placing originals on the original glass, follow the procedure below.
- When [MAGAZINE SORT] or [MAGAZINE SORT & SADDLE STITCH] is
selected: Place the first page of the originals first.
- When [SADDLE STITCH] is selected: In case of 12-page originals, set them in the
order of pages 12-1, 2-11, 10-3, 4-9, 8-5, then 6-7.
4
Press the finisher button on the basic menu.
To Next Page
Loading...
Need help?
General
