2IN1 / 4IN1 171
5
Press the [1 SIDE] (or [2 SIDE]) button.
Select other copy modes as required.
6
Press the [START] button.
y When the Reversing Automatic Document Feeder (optional) is used, the original is
scanned and copying starts.
y When the original is placed on the original glass, perform steps 7 and 8.
7
Place the next original, and press the [START] button.
y Data scanning of this original starts.
y The next original will also be scanned in the same manner when you press the [YES]
button on the touch panel, and then press the [START] button on the control panel.
y Repeat this step until all the originals have finished being scanned.
8
After all the originals have finished being scanned, press the
[FINISHED] button.
Copying starts.
To Next Page
Loading...
