Changing Data of User Groups and Templates 247
4
Key in the password (5 digits) for the selected user group, and then
press the [ENTER] button.
If no password was set when the user group was registered, skip to step 5.
5
Press the [NAME] button, and then enter the new name of the user
group.
When the [NAME] button is pressed, the letter entry menu ( P.41) is displayed. Up to
20 letters can be entered.
6
Press the [USER NAME] button, and then enter the new user name
of the user group.
When the [USER NAME] button is pressed, the letter entry menu ( P.41) is displayed.
Up to 30 letters can be entered.
To Next Page
Loading...
Need help?
General
