7 TEMPLATE
250 Changing Data of User Groups and Templates
4
Enter the following password, and then press the [ENTER] button.
When the public group is selected:
Press the [PASSWORD] button, and then key in the Admin Password (6 to 10 digits) with
the keys on the letter entry menu and the digital keys.
If an incorrect Admin Password is entered three times in a row, this equipment will not be
able to be operated for approx. 30 sec. In that case, wait until it becomes available and
then enter the correct Admin Password again.
When the user group is selected:
Key in the password (5 digits) for the selected user group. (If no password was set when
the user group was registered, skip to step 5.)
5
Select the template to be changed, and then press the [EDIT] but-
ton.
If the desired template is not displayed on the menu, press the [Prev] or [Next] button to
switch the menu.
To Next Page
Loading...
