Changing Data of User Groups and Templates 251
6
Key in the password (5 digits) for the selected template, and then
press the [ENTER] button.
If no password was set when the template was registered, skip to step 7.
7
Press the [NAME1] button and the [NAME2] button, and then enter
the new name of the template.
y When the [NAME 1] or [NAME 2] button is pressed, the letter entry menu ( P. 4 1 ) i s
displayed. Up to 11 letters can be entered.
y The following symbols cannot be used for [NAME 1] and [NAME 2].
["], [=], [|], [*], [<], [>], [?], [+], [[], []], [;], [:], [/], [\], [,], [.]
To Next Page
Loading...
Need help?
General
