9 BLINKING GRAPHIC SYMBOLS
314 Jam Symbols
10
Close the jam releasing cover and the Automatic duplexing unit. Be
sure to close both sides of the Automatic duplexing unit.
6
Remove any misfed paper
from the receiving tray or the
Bridge Unit (optional).
7
Close the cover of the Bridge
Unit (optional). Skip this step if
the Finisher (optional) is not
installed.
If no misfed paper can be found on the
exit side, perform step 8.
8
Rotate the green dial upward
as indicated by the arrow to
move the paper down.
9
Holding the green knob, close
the transport guide.
To Next Page
Loading...
