FM-750 Display User Guide 107
Mapping and Guidance 6
Curve smoothing
By default, the FM-750 display smooths curves for improved guidance and auto
steering. You can disable curve smoothing on tight turns (curves that have a radius of
less than 3m (10 ft.).
Note – If you disable curve smoothing, the FM-750 display or the Autopilot system may not
be able to auto steer around the tighter turns. Be careful when you disable curve
smoothing.
To disable curve smoothing:
1. In the Settings screen, tap
Guidance and then tap Turn Settings.
2. Tap
Minimum Turn Radius Mode and then select Automatic, Disabled or
Manual.
To Next Page
Loading...
