FM-750 Display User Guide 129
System 9
FM-750
The FM-750 screen displays two options:
• About the Display
This screen displays information about your FM-750 display, including the
current version and the serial number.
• Restore Defaults
Restore the display defaults to clear all of your current settings. Note that if you
choose to restore the default settings, your display and lightbar will restart.
Recalibrate Touchscreen
The first time you power on the display, you must calibrate the touchscreen. See Power
up, page 26.
If the current calibration does not read your selections accurately, use the Recalibrate
Touchscreen option to adjust the responsiveness of the touchscreen.
LB25 remote lightbar status The following information for the lightbar:
• Status: Connected or Disconnected
• Serial number
• Firmware version
EZ-Remote status The following information for the EZ-Remote:
• Status: Connected or Disconnected
• Serial number
• Firmware version
System status The current time and date
ID: FM-750
The following data about your FM-750 display:
• Version and Version date
•Serial number
• Part number
• Harware Revision
System voltage
Temperature
Storage: This is the number of hours of coverage logging
remaining before the internal memory is full.
Operational hours: This is the number of hours that the FM
has been operating.
Upgrade options The status of optional features and extensions
Fault history Those faults that have occurred recently (they may not be
currently active).
Select this item ... To view ..
To Next Page
Loading...
