3 Getting Started
26 FM-750 Display User Guide
Cleaning the touchscreen
To clean the FM-750 display use the following supplies:
• Ammonia-free glass cleaner
Note – Do not apply glass cleaner directly to the touchscreen.
• Soft, lint-free cotton cloth
• 50% isopropyl alcohol
1. Apply a small amount of glass cleaner to the cloth and gently rub it against the
touchscreen.
2. To clean off any stains or smudges, use a cotton cloth dampened with 50%
isopropyl alcohol.
B
Tip – Clean the display while it is switched off. It is easier to see dirt and fingerprints when
the touchscreen is dark.
Power up
To turn on the display, press the power button on the rear of the display. After a short
time, the Welcome screen appears:
The first time that you turn on the FM-750 display, the following wizards appear:
• Touchscreen calibration:
To Next Page
Loading...
