9 System
128 FM-750 Display User Guide
Unlock / Upgrade
Use the Unlock/Upgrade screen to:
• Upgrade your FM-750 display to a newer firmware version.
• Unlock features such as Field-IQ crop input control system.
Upgrading your display
1. Copy the new firmware file to your office computer.
2. Connect the FM-750 display USB memory stick to your office computer.
3. Unzip the firmware file and then save it to the root folder of the USB memory
stick.
4. Insert the USB memory stick into the USB socket of the display.
5. In the Unlock/Upgrade screen, tap
Firmware Upgrade Wizard.
6. Select the file that you want to upload, and then tap . The firmware
begins to load.
Once the new firmware has successfully loaded, the display automatically
restarts. Do not disconnect the power from the display while it is rebooting.
Unlocking features
Note – To unlock features, you must have an unlock code. To obtain an unlock code,
contact your local reseller.
1. In the Unlock/Upgrade screen, tap
Password Upgrade.
2. Enter the unlock password. Note that passwords are case sensitive.
Once the password is successfully entered, the display automatically restarts.
Do not disconnect the power from the display while it is rebooting.
Status
Use the Status screen to view the current status of the system. The items that appear in
the Status screen vary according to the features that you use.
Select this item ... To view ..
Region protect The GPS signal region you are currently in and whether it is
locked or unlocked.
If your region is locked, contact your local reseller.
Language Pack status The language packs that have been installed on the display.
To Next Page
Loading...
