Trimble FM-750 - Creating a new field; Selecting (loading) a field; Adding an AB line to a current field; Selecting (loading) an AB line into a field

FM-750 Display User Guide 97
Mapping and Guidance 6
Creating a new field
1. In the guidance view tap . The Finished with Field screen appears.
2. Tap
Yes.
3. In the Create New or Select Old Field screen, tap
Create New Field .
4. To setup the new field, progress through the wizard.
5. Follow the on screen instructions to drive your new line. For more information,
see Mapping an AB line, page 100.
Selecting (loading) a field
1. In the guidance view tap . The Finished with Field screen appears.
2. In the Finished with Field screen tap
Yes.
3. In the Create New or Select Old Field screen, tap
Select Field by Name.
4. In the Select Field by Name screen, select the field you wish to load.
5. To setup the field, progress through the wizard.
Adding an AB line to a current field
To create a new AB line in a current field:
1. In the guidance view tap . The Finished with Field screen appears.
2. In the Finished with Field screen tap
No.
3. In the Create New or Select Old Swath screen, tap
Add AB Line.
4. To setup the new field, progress through the wizard.
5. Follow the on screen instructions to drive your new line. (For more information,
see Mapping an AB line, page 100).
Selecting (loading) an AB line into a field
1. In the guidance view tap . The Finished with Field screen appears.
2. In the Finished with Field screen tap
No.
3. In the Create New or Select Old Swath screen, tap
Select Old.
4. To setup the new field, progress through the wizard.
5. Follow the on screen instructions to drive your new line. For more information,
see Mapping an AB line, page 100.