2-12 Hardware Overview
Motion Coordinator Euro205(X)
Trio Motion Technology
Connections to the Euro 205(X)
5 volt Power Supply
The minimum connections to the Euro205 are just the 0v and 5v pins. The
Euro205(X) is protected against reverse polarity on these pins. Application of
more than 5.5 volts will permanently damage the Motion Coordinator beyond
economic repair. All the 0v and 5v pins are internally connected together. The 0v
pins are, in addition, internally connected to the AGND pins. The Euro205(X) has
a current consumption of approximately 500mA on the 5v supply. The supply
should be filtered and regulated within 5%.
Built-in CAN Connector
The Euro205(X) features a built-in CAN channel. This is pri-
marily intended for Input/Output expansion via Trio's P315
and P325 modules. It may be used for other purposes when
I/O expansion is not required.
1
1
C B A
X6
X5
96 Way Connector
Daughter Board Connector
Serial Connector A
CAN Connector
LED Array
DAC Socket
X5 and X6 (if fitted) are only
used for production testing !
Rechargable Battery
M6 and M7
Resettable
Fuses
Serial Connector B
0v
SCREEN
CAN_H
CAN_L
To Next Page
Loading...
Need help?
General
