Trio Motion Coordinator MC216 - Constants

8-150Trio BASIC Commands
Constants
Trio Motion Technology
Constants
FALSE
Type:
Constant
Description:
The constant FALSE takes the numerical value of 0.
Example:
test:
res=IN(0) OR IN(2)
IF res=FALSE THEN PRINT "Inputs are off"
ENDIF
OFF
Type:
Constant
Description:
OFF returns the value 0
Example:
IF IN(56)=OFF THEN GOTO label
‘Branch if input 56 is off.
ON
Type:
Constant
Description:
ON returns the value 1.
Example:
OP(lever,ON)’ This sets the output named lever to ON.