10-8 Support Software
Motion Perfect 2 Projects
Trio Motion Technology
Project Check Options
Save
Save the controller contents to disk.
If you have never connected with this controller before, and therefore
do not have the project on your PC, or if there in an inconsistency in
the project check and you are sure that the project on the controller is
the correct version, then select SAVE to copy the programs on the con-
troller to disk.
Note: This will of course overwrite any programs already in the PC copy
of the project. If you are unsure which is the correct versiom, you
should save the project with a new name to avoid overwriting any
existing project programs on the PC.
Load
Load the PC files onto the controller
If you are uploading a complete project from the PC to the controller,
or the project check fails and you are sure the version on your PC is
correct, then you should use this option to upload the entire project
from the PC to the controller.
Note: The entire contents of the programs on the controller will be
erased. If you are unsure, SAVE the controller contents first!
Change
Change the project on the PC to compare with..
If you have been working on more than one project, the project on the
controller may not match the 'last project' remembered by Motion Per-
fect. If this is the case you can use this option to select another project
on the PC. Once you select an alternative, Motion Perfect will perform
a fresh project check and the above process will be repeated.
To Next Page
Loading...
