Motion Coordinator Technical Reference Manual
Support Software 10-83
Project Autoloader
Creating an AutoLoader floppy disk
To create an AutoLoader floppy disk follow the steps below:
• Take a blank floppy disk and copy the AutoLoader.exe program file into the
root directory.
• Create a sub-directory called LoaderFiles in the root directory.
• If you are going to load a project then copy the project directory of the
project to be loaded into the LoaderFiles directory created above, so that it is
a sub-directory of LoaderFiles.
• If you are going to load any tables then copy all the table files into the
LoaderFiles directory.
• If you are going to load any extra programs then copy the program files into
the LoaderFiles directory.
• Using an ASCII text editor (i.e. Windows Notepad) create and edit the script
file (AutoLoader.tas) in the LoaderFiles directory, using the appropriate
commands for the operations to be carried out.
To Next Page
Loading...
