12-24Using the Trio ActiveX Control
Input / Output Commands
Trio Motion Technology
Op
Description:
Performs the corresponding
OP(…)
command on the Motion Coordinator
Syntax:
Op(Output, State)
Parameters:
Return Value:
TrioPC STATUS
.
VARIANT Output:
Numeric value. If this is the only value specified then
it is the bit map of the outputs to be specified, oth-
erwise it is the number of the output to be written.
VARIANT State:
Optional numeric value that specifies the desired
status of the output, 0 implies off, not-0 implies on.
To Next Page
Loading...
