Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Page 443

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 23-7
Configuration - Voice Port FXS Mode
output-gain
Use the Voice Port FXS output-gain command to set the gain on the transmit side voice path for the
specified voice channel(s).
Syntax: (config-vport-fxs-{n})# output-gain value
Example: (config-vport-fxs-1)# output-gain 4
Supported Platforms:
Adit 3104, Adit 3500, MSR
per-line-logging
Use the Voice Port FXS per-line-logging command to enable the logging per line feature. To to disable
logging, see no per-line-logging command on page 23-6
Syntax: (config-vport-fxs-{n})# per-line-logging enable
Example: (config-vport-fxs-1)# per-line-logging enable
Supported Platforms:
Adit 3104, Adit 3500, MSR
shutdown
Use the Voice Port FXS shutdown command to set this port down (Out-of-Service). To set this voice
port up (In-Service), see no shutdown command on page 23-6.
Syntax: (config-vport-fxs-{n})# shutdown
Example: (config-vport-fxs-1)# shutdown
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field Definition
value Range -12 to +6dB. Default is 0.