7.3 Program Table Operation
7.3.6 SigmaWin+ Procedures
7-31
The program table edited on the SigmaWin+ will be written to the SERVOPACK and all edited rows
will change to white.
This concludes the writing procedure.
Saving the Program Table
Saving the Program Table to Flash Memory in the SERVOPACK
To prevent the program table from being deleted when the power supply to the SERVOPACK is
turned OFF, you must save it to flash memory in the SERVOPACK. The program table that is
saved in the flash memory is automatically loaded each time the power supply is turned ON.
We recommend that you save the program table that is normally used for operation in this flash
memory.
1.
Click the Save Button in the Program Table Editing Dialog Box.
The Save Table Dialog Box will be displayed.
2.
Click the OK Button.
This concludes the saving procedure.
Saving the Program Table to a Computer File
You can save the program table to a file on the computer. Use computer files to back up pro-
gram tables.
To Next Page
Loading...
Need help?
General
