YOKOGAWA WT500 - Setting the Measurement Ranges for an External Current Sensor (Optional)

4-13
IM 760201-01E
Measurement Conditions
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
4.5 Setting the Measurement Ranges for an
External Current Sensor (Optional)
Procedure
Selecting the External Current Sensor Input Connector
1.
Press SETUP to display the Setup menu.
2.
Use the cursor keys to select Ranges.
3.
Press SET to display the Range Settings dialog box.
4.
Use the cursor keys to select the Ext Sensor boxes of the elements that will use
external current sensor connectors.
5.
Press SET. The Ext Sensor box lights.
If the Ext Sensor box is already lit, proceed to step 7.
Setting the External Current Sensor Range
6.
Use the cursor keys to select Current.
7.
Press SET. The external current sensor range entry box appears.
8.
Use the cursor keys to select the external current sensor range.
9.
Press SET to confirm the external current sensor range.
Note
The external current sensor range can also be set using the CURRENT ( and ) keys. For
information about how to use the CURRENT ( and keys), see section 4.4.
10.
Repeat steps 1 to 10 to enter the external current sensor ranges for all of the
elements.