YOKOGAWA WT500 - Setting the Equations for Apparent and Reactive Power

5-11
IM 760201-01E
Power Measurement
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
5.4 Setting the Equations for Apparent and
Reactive Power
Procedure
1.
Press SETUP to display the Setup menu.
If the full Setup menu does not appear, proceed to step 2. If the full Setup menu appears,
proceed to step 4.
2.
Use the cursor keys to select Details.
3.
Press SET to display the full Setup menu.
4.
Use the cursor keys to select Measure.
5.
Press SET to display the Measure Settings dialog box.
Selecting an Apparent Power Equation
6.
Use the cursor keys to select S Formula.
7.
Press SET to display the apparent power equation selection dialog box.
8.
Use the cursor keys to select an apparent power equation.
9.
Press SET to confirm the equation.
Selecting an Apparent Power and Reactive Power Equation
6.
Use the cursor keys to select S,Q Formula.
7.
Press SET to display the apparent power equation selection dialog box.
8.
Use the cursor keys to select an apparent power equation.
* Type 3 only appears on models with the harmonic measurement option.
9.
Press SET to confirm the equation.