3-1
IM 760201-01E
Before You Start Measuring
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
3.1 Handling Precautions
Safety Precautions
If you are using this instrument for the first time, make sure to thoroughly read “Safety
Precautions,” on pages vi and vii.
Do Not Remove the Case
Do not remove the case from the instrument. Some parts of the instrument use high
voltages and are extremely dangerous. For internal inspection and adjustment, contact
your nearest YOKOGAWA dealer.
Unplug If Abnormal Behavior Occurs
If you notice smoke or unusual odors coming from the instrument, immediately turn
off the power and unplug the power cord. Also, turn off the power to any circuits under
measurement that are connected to the input terminals. Then, contact your nearest
YOKOGAWA dealer.
Do Not Damage the Power Cord
Nothing should be placed on top of the power cord, and it should be kept away from any
heat sources. When removing the plug from the power outlet, do not pull on the cord.
Pull from the plug. If the power cord is damaged, purchase a replacement with the same
part number as the one indicated on page iv.
Chapter 3
Before You Start Measuring
To Next Page
Loading...
Need help?
General
