YOKOGAWA WT500 - 4.7 Setting the Measurement Period

4-19
IM 760201-01E
Measurement Conditions
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
4.7 Setting the Measurement Period
Procedure
1.
Press SETUP to display the Setup menu.
2.
Use the cursor keys to select Sync Source.
3.
Press SET to display the Sync Source Settings menu.
Setting the Synchronization Source
4.
Use the cursor keys to select the sync source of the element that you want to
set.
5.
Press SET to display the sync source entry box.
6.
Use the cursor keys to select a sync source.
7.
Press SET to confirm the sync source.