YOKOGAWA WT500 - Setting Normal or Continuous Integration

5-23
IM 760201-01E
Power Measurement
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
5.8 Setting Normal or Continuous Integration
Procedure
1.
Press SETUP to display the Setup menu.
2.
Use the cursor keys to select Integration.
3.
Press SET to display the Integration Settings menu.
Selecting Normal or Continuous Mode
4.
Use the cursor keys to select Integ Mode.
5.
Press SET to display the integration mode selection box.
6.
Use the cursor keys to select Normal or Continuous.
7.
Press SET to confirm the selection.