YOKOGAWA WT500 - Chapter 4 Measurement Conditions; 4.1 Panel Keys and Setup Menus Used in This Chapter

4-1
IM 760201-01E
Measurement Conditions
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
4.1 Panel Keys and Setup Menus Used in This
Chapter
Panel Keys Used in This Chapter
ESC
RESET
SET
CAL
PAGE
PAGE
ELEMENT
1
2
3
ELEMENT
ALL
RANGE
VOLTAGE CURRENT
AUTO AUTO
DISPLAY
NUMERIC WAVE OTHERS
FORM ITEM
CURSOR
INTEGRATOR
SETUP
INPUT INFO
START/
STOP
RESET
HOLD
SINGLE
SHIFT MISC
NULL
LOCAL
KEY LOCK
FILE IMAGE
MENU
STORE
STORE SET
POWER
Cursor keys
4.4 Setting the Measurement Range
for Direct Input
4.5 Setting the Measurement Ranges
for an External Current Sensor (Optional)
4.4 Setting the Measurement Range
for Direct Input
4.12 Holding and Performing Single
Measurements
Displays the SETUP menu
(see below for the contents of the menu)
Displays the MISC menu
(see below for the contents of the menu)
Select and confirm menu items
Setup Menus Used in This Chapter
To set a parameter, access its menu by pressing the appropriate panel key.
The setup menus and menu items used in this chapter are shown below, along with the
sections that correspond to their operating instructions.
SETUP
MISC
SETUP key
MISC key
4.11 Selecting a Crest Factor
4.10 Selecting an Averaging Method
4.6 Setting the Scaling Feature When Using a VT or CT
4.7 Setting the Measurement Period
4.8 Selecting an Input Filter
4.9 Selecting the Data Update Rate
4.4 Setting the Measurement Range for Direct Input
4.5 Setting the Measurement Ranges
for an External Current Sensor (Optional)
4.2 Selecting a Wiring System
4.3 Selecting Independent Input Element Configuration
Chapter 4 Measurement Conditions