YOKOGAWA WT500 - Setting Real-Time Integration or Real-Time Continuous Integration

5-26
IM 760201-01E
5.9 Setting Real-Time Integration or Real-Time
Continuous Integration
Procedure
1.
Press SETUP to display the Setup menu.
2.
Use the cursor keys to select Integration.
3.
Press SET to display the Integration Settings menu.
Selecting Real-Time Integration Mode (R-Normal) or Real-Time Continuous
Integration Mode (R-Continuous)
4.
Use the cursor keys to select Integ Mode.
5.
Press SET to display the integration mode selection box.
6.
Use the cursor keys to select R-Normal or R-Continuous.
7.
Press SET to confirm the selection.