10-16
IM 760201-01E
10.5 Loading Setup Parameters and Displaying File
Properties
CAUTION
Do not remove USB memory or turn off the power when that indicates USB
access or USB memory access indicators are blinking. If you do, the USB memory
may be damaged, and its data may be corrupted.
Procedure
1.
Press FILE to display the File menu.
2.
Use the cursor keys to select File Item.
3.
Press SET to display the function selection box.
4.
Use the cursor keys to select Setup.
5.
Press SET to confirm the selection.
6.
Use the cursor keys to select Load.
7.
Press SET to display the File List dialog box and the Load menu.
To Next Page
Loading...
Need help?
General
