4.10 Selecting an Averaging Method
Procedure
1.
Press SETUP to display the Setup menu.
2.
Use the cursor keys to select Averaging.
3.
Press SET to display the Averaging Settings menu.
Selecting Whether or Not to Average Values
4.
Use the cursor keys to select Averaging.
5.
Press SET to select ON or OFF.
Selecting an Averaging Method
6.
Use the cursor keys to select Type.
7.
Press SET to select Exp or Lin.
Setting the Attenuation Constant or the Average Count
8.
Use the cursor keys to select Count.
9.
Press SET to display the attenuation constant or average count entry box.
If the averaging type is Exp (exponential averaging), set the attenuation constant. If the
averaging type is Lin (moving averaging), set the average count.
10.
Press SET to confirm the attenuation constant or average count.
To Next Page
Loading...
Need help?
General
