13-2
IM 760201-01E
13.2 Error Messages and Troubleshooting Methods
Error Messages
Error messages may appear on the screen while you are using the WT500. This section
explains the meanings of the error messages and how to respond to them. You can
display the error messages in English or Japanese (see section 3.17 for details). If
servicing is necessary to solve the problem indicated by a message, contact your nearest
YOKOGAWA dealer.
Other communication-related error messages may also appear. These messages are
explained in the Communication Interface User’s Manual (IM760201-17E).
Error in Execution
Code Message Solution Refer to
section
601 Invalid file name. Check the file name. 10.4, 10.5
602, 603 No USB device or no storage media inserted. Check the USB device connection, and the
existence of a storage medium in the device.
10.2
604 Media failure. Check the storage medium. —
605 File not found. Check the file name and the storage medium. —
606 Media is protected. Set the disk’s (medium’s) write protect switch to
OFF.
—
607 Media was removed while accessing. Check the storage medium. —
608, 609 File already exists. — 10.4
610 Contains invalid characters. — 10.4
611, 612 Media full. Delete unnecessary file(s) or use another disk. 10.3 to 10.9
613 Cannot delete a directory if there are files in the
directory.
Delete all the files in the directory to be deleted. 10.9
614 File is protected. — 10.8
615 Physical format error. Reformat the medium. If the same error occurs, the
instrument is probably unable to execute a format
on this medium.
9.3
616 to 620 File system failure. Check using another disk. If the same message still
appears, maintenance service is required.
—
621 File is damaged. Check the file. —
622 to 641 File system failure. Check using another disk. If the same message still
appears, maintenance service is required.
—
643 to 653 Media failure. Check the medium. —
655 to 664 File system failure. Check using another disk. If the same message still
appears, maintenance service is required.
—
665 Cannot load this file format. File was stored on
other models or other versions.
— —
666 File is now being accessed. Execute after access is made. —
671 Save data not found. Check for presence of data. 10.4, 10.5
674 Initializing file system. Please wait. 10.3
675 Cannot load this file.
Model/options do not conform.
— —
705 Can not operate while accessing medium. Wait until access has completed. —
750 Cannot connect to the ftp server. Confirm the network settings and connection. —
751 Has not connect with ftp server yet. Confirm the network settings and connection. —
752 This ftp function in not supported. — —
753 FTP Error: Pwd Confirm the network settings and connection. —
754 FTP Error: Cwd Confirm the network settings and connection. —
755 FTP Error: Rm Confirm the network settings and connection. —
756 FTP Error: List Confirm the network settings and connection. —
757 FTP Error: Mkdir Confirm the network settings and connection. —
758 FTP Error: Rmdir Confirm the network settings and connection. —
759 FTP Error: Get Confirm the network settings and connection. —
760 FTP Error: Put Confirm the network settings and connection. —
761 FTP Error: GetData Confirm the network settings and connection. —