YOKOGAWA WT500 - 11.3 Configuring TCP;IP Settings

11-3
IM 760201-01E
Ethernet Interface (Optional)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
11.3 Configuring TCP/IP Settings
Procedure
You must restart the WT500 or execute Bind (see page 11-6 for details) to
apply new TCP/IP settings and changes.
1.
Press MISC to display the Misc Menu.
2.
Use the cursor keys to select Network.
3.
Press SET to display the Network menu.
4.
Use the cursor keys to select TCP/IP Setup.
5.
Press SET to display the TCP/IP Setup dialog box.
To Only Use DHCP
6.
Use the cursor keys to select DHCP.
7.
Press SET to select ON.
8.
Use the cursor keys to select DNS.
9.
Press SET to display the DNS selection box.
10.
Use the cursor keys to select OFF.