YOKOGAWA WT500 - Setting the MAX Hold Feature

5-38
IM 760201-01E
5.14 Setting the MAX Hold Feature
Procedure
Selecting Whether or Not to Use the MAX Hold Feature in the Numeric
Data Display
1.
Press SETUP to display the Setup menu.
If the full Setup menu does not appear, proceed to step 2. If the full Setup menu appears,
proceed to step 4.
2.
Use the cursor keys to select Details.
3.
Press SET to display the full Setup menu.
4.
Use the cursor keys to select User Function.
5.
Press SET to display the User-Defined Function Settings dialog box.
6.
Use the cursor keys to select Max Hold.
7.
Press SET to select ON or OFF.