YOKOGAWA WT500 - Entering Values and Character Strings

3-27
IM 760201-01E
Before You Start Measuring
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
3.14 Entering Values and Character Strings
Entering Values
When you select a setup parameter with SET, an entry box appears. Then, you can
change the value by using the cursor keys. Use the left and right cursor keys to select
digits, and use the up and down cursor keys to set the value of a digit.
Note
Some of the parameters that can be changed using the cursor keys are reset to their initial
values when SHIFT+ESC (RESET) is pressed.