Integration-Related Display Indications
Integ:Reset
Displayed when the
integrated value is
reset and integration
can be started.
Integ:Start
Displayed, along with
the elapsed
integration time,
when integration is in
progress.
Integ:Stop
Displayed, along with
the elapsed
integration time,
when integration is
aborted, canceled, or
finished.
Integ:Ready
Displayed when a
ready state is entered
in real-time
integration mode.
Note
In addition to Reset, Start, Stop, and Ready, the following integration status indicators may
also appear.
• TimeUp: When integration continues up to the time specified by the integration timer, it
automatically stops. This integration status is referred to as the TimeUp status.
• Error: The WT500 stores and holds the integration result even when a power failure
occurs while integration is in progress. When the power returns, integration is stopped,
and the integration result calculated up to the point when the power failure occurred is
displayed. This integration status is referred to as the Error status.
Displayed when the integration time is set to a non-zero value Displayed during a ready state
Elapsed
integration
time
Scheduled integration
start time
Integration timer
5.6 Integration
To Next Page
Loading...
Need help?
General
