MECHANICAL INSTALLATION
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
103/266
5.8.1.1. Installation
Procedure:
1. Before lifting the heat exchanger onto the roof, cut off the cable ties.
2. Loop the cables as illustrated and fasten them to the cable tie
mounts (circles).
3. Loop a length of the cables and fasten them to the cable tie mount (circle).
NOTICE Risk of damage!
Incorrect installation of the heat exchanger cables can cause:
– Ground fault
– Unexpected shutdown of the drive
– Damage to the heat exchanger
To Next Page
Loading...
