ABB ACS6080 - Displaying a Fault and Resetting the Fault Memory

CDP CONTROL PANEL
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
192/266
6. To confirm the selection and to return to the actual signals display, press the
ENTER key.
7. To cancel the selection and keep the original selection, press any of the mode
selection keys. The selected keypad mode is entered.
9.2.2.6. Displaying a fault and resetting the fault memory
1. To open the actual signals display, press the ACT key.
1 L -> 600.0 rpm
2 ACTUAL SIGNALS
05 NP VOLTAGE
1000 V
ENTER
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
NP VOLT 0 V
ACT PAR FUNC DRIVE
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
POWER 0.0 kW